MICRO 100
5 FL - 8.000 mm Cutter DIA x 0.50 mm Radius x 16.00 mm LOC
- SKU:
- VHSM-080-5
- MPN:
- VHSM-080-5
- Availability:
- 16
- Shipping:
- Calculated at Checkout
Description
8.000 mm Cutter DIA x 0.50 mm Radius x 16.00 mm Length of Cut Carbide Corner Radius End Mill for Steels and High Temperature Alloys, 5 Flutes
View AllClose
Additional Information
Cutter Diameter: |
8.000 mm |
Coating: |
UN |
Flutes: |
5 |
Length of Cut: |
16.00 mm |
Shank Diameter: |
8.000 mm |
Corner Radius: |
0.50 mm |
Overall Length: |
63.0 mm |
Metric: |
Y |
Related Products
Related Products
4 FL - 8.000 mm Cutter DIA x 0.50 mm Radius x 16.00 mm LOC
MICRO 100
$34.30
8.000 mm Cutter DIA x 0.50 mm Radius x 16.00 mm Length of Cut Carbide Corner Radius End Mill for Steels and High Temperature Alloys, 4 Flutes
VHSM-080-4
5 FL - 8.000 mm Cutter DIA x 0.50 mm Radius x 16.00 mm LOC - nACRo® Coated
MICRO 100
$47.00
8.000 mm Cutter DIA x 0.50 mm Radius x 16.00 mm Length of Cut Carbide Corner Radius End Mill for Steels and High Temperature Alloys, 5 Flutes, nACRo® Coated
VHSM-080-5K
5 FL - 8.000 mm Cutter DIA x 0.50 mm Radius x 19.00 mm LOC
MICRO 100
$42.20
8.000 mm Cutter DIA x 0.50 mm Radius x 19.00 mm Length of Cut Carbide Corner Radius End Mill for Steels and High Temperature Alloys, 5 Flutes
VHMM-080-5
5 FL - 6.000 mm Cutter DIA x 0.50 mm Radius x 16.00 mm LOC
MICRO 100
$35.90
6.000 mm Cutter DIA x 0.50 mm Radius x 16.00 mm Length of Cut Carbide Corner Radius End Mill for Steels and High Temperature Alloys, 5 Flutes
VHMM-060-5
4 FL - 8.000 mm Cutter DIA x 0.50 mm Radius x 19.00 mm LOC
MICRO 100
$38.20
8.000 mm Cutter DIA x 0.50 mm Radius x 19.00 mm Length of Cut Carbide Corner Radius End Mill for Steels and High Temperature Alloys, 4 Flutes
VHMM-080-4
5 FL - 8.000 MM CUTTER DIA X 16.00 MM LOC ,ASMM-080-5
MICRO 100
$37.50
8.000 MM CUTTER DIA X 16.00 MM LENGTH OF CUT CARBIDE SQUARE END MILL FOR STEELS AND HIGH TEMPERATURE ALLOYS, 5 FLUTES,ASMM-080-5
ASMM-080-5
5 FL - 8.000 mm Cutter DIA x 0.50 mm Radius x 19.00 mm LOC - nACRo® Coated
MICRO 100
$51.30
8.000 mm Cutter DIA x 0.50 mm Radius x 19.00 mm Length of Cut Carbide Corner Radius End Mill for Steels and High Temperature Alloys, 5 Flutes, nACRo® Coated
VHMM-080-5K
5 FL - 6.000 mm Cutter DIA x 0.50 mm Radius x 16.00 mm LOC - nACRo® Coated
MICRO 100
$42.30
6.000 mm Cutter DIA x 0.50 mm Radius x 16.00 mm Length of Cut Carbide Corner Radius End Mill for Steels and High Temperature Alloys, 5 Flutes, nACRo® Coated
VHMM-060-5K
4 FL - 8.000 mm Cutter DIA x 0.50 mm Radius x 19.00 mm LOC - AlTiN Coated
MICRO 100
$46.15
8.000 mm Cutter DIA x 0.50 mm Radius x 19.00 mm Length of Cut Carbide Corner Radius End Mill for Steels and High Temperature Alloys, 4 Flutes, AlTiN Coated
VHMM-080-4X