TITAN USA
5 FL - 0.3125" (5/16) Cutter DIA x 0.0300" Radius x 0.8750" (7/8) LOC - Uncoated
- SKU:
- TC63821
- Shipping:
- Calculated at Checkout
Description
0.3125" (5/16) Cutter DIA x 0.0300" Radius x 0.8750" (7/8) Length of Cut Carbide Corner Radius End Mill, 5 Flutes, Uncoated
View AllClose
Additional Information
Coating: |
UNCOATED |
Cutter Diameter: |
0.3125 (5/16) |
Flutes: |
5 |
Length of Cut: |
0.8750 (7/8) |
Shank Diameter: |
0.3125 (5/16) |
Corner Radius: |
0.03 |
Overall Length: |
2.5000 (2-1/2) |
Substrate: |
carbide |
Metric: |
N |
Related Products
Related Products
5 FL - 0.3125" (5/16) Cutter DIA x 0.0100" Radius x 0.8750" (7/8) LOC - Uncoated
TITAN USA
Now:
$27.09
Was:
$30.10
0.3125" (5/16) Cutter DIA x 0.0100" Radius x 0.8750" (7/8) Length of Cut Carbide Corner Radius End Mill, 5 Flutes, Uncoated
TC63818
5 FL - 0.3125" (5/16) Cutter DIA x 0.0300" Radius x 0.8750" (7/8) LOC - AlTiN Coated
TITAN USA
Now:
$33.93
Was:
$37.70
0.3125" (5/16) Cutter DIA x 0.0300" Radius x 0.8750" (7/8) Length of Cut Carbide Corner Radius End Mill, 5 Flutes, AlTiN Coated
TC63921
5 FL - 0.3125" (5/16) Cutter DIA x 0.0100" Radius x 0.8750" (7/8) LOC - AlTiN Coated
TITAN USA
Now:
$33.93
Was:
$37.70
0.3125" (5/16) Cutter DIA x 0.0100" Radius x 0.8750" (7/8) Length of Cut Carbide Corner Radius End Mill, 5 Flutes, AlTiN Coated
TC63918
2 FL - 0.3125 (5/16)" CUTTER DIA X 0.8750 (7/8)" LOC, 14620
HARVEY TOOL
$73.20
0.3125 (5/16)" CUTTER DIA X 0.8750 (7/8)" LENGTH OF CUT CARBIDE COMPOSITE CUTTING SQUARE END MILL, 2 FLUTES
14620
3 FL - 0.3125" (5/16) Cutter DIA x 0.0300" Radius x 0.8125" (13/16) LOC - Uncoated
TITAN USA
Now:
$39.83
Was:
$44.25
0.3125" (5/16) Cutter DIA x 0.0300" Radius x 0.8125" (13/16) Length of Cut Carbide Corner Radius End Mill for Aluminum Chipbreaker, 3 Flutes, Uncoated
TC67291
5 FL - 0.3125" (5/16) Cutter DIA x 0.0300" Radius x 0.5000" (1/2) LOC - Uncoated
TITAN USA
Now:
$19.71
Was:
$21.90
0.3125" (5/16) Cutter DIA x 0.0300" Radius x 0.5000" (1/2) Length of Cut Carbide Corner Radius End Mill, 5 Flutes, Uncoated
TC61621
3 FL - 0.3125" (5/16) Cutter DIA x 0.0300" Radius x 1.3750" (1-3/8) LOC - Uncoated
TITAN USA
Now:
$63.32
Was:
$70.35
0.3125" (5/16) Cutter DIA x 0.0300" Radius x 1.3750" (1-3/8) Length of Cut Carbide Corner Radius End Mill for Aluminum Chipbreaker, 3 Flutes, Uncoated
TC67327
3 FL - 0.3125" (5/16) Cutter DIA x 0.0300" Radius x 0.5000" (1/2) LOC - Uncoated
TITAN USA
Now:
$32.76
Was:
$36.40
0.3125" (5/16) Cutter DIA x 0.0300" Radius x 0.5000" (1/2) Length of Cut Carbide Corner Radius End Mill for Aluminum Chipbreaker, 3 Flutes, Uncoated
TC67255
4 FL - 0.3125 (5/16)" CUTTER DIA X 0.0300" RADIUS X 0.4690" LOC, 844920
HARVEY TOOL
$133.10
0.3125 (5/16)" CUTTER DIA X 0.0300" RADIUS X 0.4690" LENGTH OF CUT CARBIDE REDUCE SHANK CORNER RADIUS END MILL, 4 FLUTES
844920