TITAN USA
5 FL - 0.1250" (1/8) Cutter DIA x 0.0300" Radius x 0.5000" (1/2) LOC - Uncoated
- SKU:
- TC63810
- Shipping:
- Calculated at Checkout
Description
0.1250" (1/8) Cutter DIA x 0.0300" Radius x 0.5000" (1/2) Length of Cut Carbide Corner Radius End Mill, 5 Flutes, Uncoated
View AllClose
Additional Information
Coating: |
UNCOATED |
Cutter Diameter: |
0.1250 (1/8) |
Flutes: |
5 |
Length of Cut: |
0.5000 (1/2) |
Shank Diameter: |
0.1250 (1/8) |
Corner Radius: |
0.03 |
Overall Length: |
1.5000 (1-1/2) |
Substrate: |
carbide |
Metric: |
N |
Related Products
Related Products
3 FL - 0.1250" (1/8) Cutter DIA x 0.0300" Radius x 0.5000" (1/2) LOC - Uncoated
TITAN USA
Now:
$18.90
Was:
$21.00
0.1250" (1/8) Cutter DIA x 0.0300" Radius x 0.5000" (1/2) Length of Cut Carbide Corner Radius End Mill for Aluminum Chipbreaker, 3 Flutes, Uncoated
TC67282
5 FL - 0.1250" (1/8) Cutter DIA x 0.0200" Radius x 0.5000" (1/2) LOC - Uncoated
TITAN USA
Now:
$16.65
Was:
$18.50
0.1250" (1/8) Cutter DIA x 0.0200" Radius x 0.5000" (1/2) Length of Cut Carbide Corner Radius End Mill, 5 Flutes, Uncoated
TC63809
2 FL - 0.1250 (1/8)" CUTTER DIA X 0.0300" RADIUS X 0.5000 (1/2)" LOC, 46430
HARVEY TOOL
$23.90
0.1250 (1/8)" CUTTER DIA X 0.0300" RADIUS X 0.5000 (1/2)" LENGTH OF CUT CARBIDE CORNER RADIUS END MILL, 2 FLUTES
46430
5 FL - 0.1250" (1/8) Cutter DIA x 0.0300" Radius x 0.5000" (1/2) LOC - AlTiN Coated
TITAN USA
Now:
$20.61
Was:
$22.90
0.1250" (1/8) Cutter DIA x 0.0300" Radius x 0.5000" (1/2) Length of Cut Carbide Corner Radius End Mill, 5 Flutes, AlTiN Coated
TC63910
5 FL - 0.5000" (1/2) Cutter DIA x 0.0300" Radius x 0.6250" (5/8) LOC - Uncoated
TITAN USA
Now:
$42.93
Was:
$47.70
0.5000" (1/2) Cutter DIA x 0.0300" Radius x 0.6250" (5/8) Length of Cut Carbide Corner Radius End Mill, 5 Flutes, Uncoated
TC61630
4 FL - 0.1250 (1/8)" CUTTER DIA X 0.0300" RADIUS X 0.5000 (1/2)" LOC, 32430
HARVEY TOOL
$23.90
0.1250 (1/8)" CUTTER DIA X 0.0300" RADIUS X 0.5000 (1/2)" LENGTH OF CUT CARBIDE CORNER RADIUS END MILL, 4 FLUTES
32430
3 FL - 0.1250 (1/8)" CUTTER DIA X 0.0300" RADIUS X 0.5000 (1/2)" LOC, 870930
HARVEY TOOL
$23.90
0.1250 (1/8)" CUTTER DIA X 0.0300" RADIUS X 0.5000 (1/2)" LENGTH OF CUT CARBIDE CORNER RADIUS END MILL, 3 FLUTES
870930
5 FL - 0.1250" (1/8) Cutter DIA x 0.0300" Radius x 0.2500" (1/4) LOC - Uncoated
TITAN USA
Now:
$8.91
Was:
$9.90
0.1250" (1/8) Cutter DIA x 0.0300" Radius x 0.2500" (1/4) Length of Cut Carbide Corner Radius End Mill, 5 Flutes, Uncoated
TC61610
3 FL - 0.5000" (1/2) Cutter DIA x 0.0300" Radius x 0.6250" (5/8) LOC - Uncoated
TITAN USA
Now:
$55.04
Was:
$61.15
0.5000" (1/2) Cutter DIA x 0.0300" Radius x 0.6250" (5/8) Length of Cut Carbide Corner Radius End Mill for Aluminum Chipbreaker, 3 Flutes, Uncoated
TC67263