HARVEY TOOL
4 FL - 0.2500 (1/4)" CUTTER DIA X 0.0300" RADIUS X 1.2500 (1-1/4)" LOC, 917130
- SKU:
- 917130
- Shipping:
- Calculated at Checkout
Description
0.2500 (1/4)" CUTTER DIA X 0.0300" RADIUS X 1.2500 (1-1/4)" LENGTH OF CUT CARBIDE CORNER RADIUS END MILL, 4 FLUTES
View AllClose
Additional Information
Cutter Diameter: |
0.2500" (1/4) |
Length of Cut: |
1.2500" (1-1/4) |
Overall Length: |
4.0000" (4) |
Corner Radius: |
0.0300" |
Flutes: |
4" |
LOC Multiple: |
(5x) |
Shank Diameter: |
0.2500" (1/4) |
Metric: |
N |
Coating: |
UN |
Related Products
Related Products
4 FL - 0.2500 (1/4)" CUTTER DIA X 0.0300" RADIUS X 1.2500 (1-1/4)" LOC - ALTIN COATED, 917130-C3
HARVEY TOOL
$49.90
0.2500 (1/4)" CUTTER DIA X 0.0300" RADIUS X 1.2500 (1-1/4)" LENGTH OF CUT CARBIDE CORNER RADIUS END MILL, 4 FLUTES, ALTIN COATED
917130-C3
3 FL - 0.2500" (1/4) Cutter DIA x 0.0300" Radius x 1.2500" (1-1/4) LOC - Uncoated
TITAN USA
Now:
$46.94
Was:
$52.15
0.2500" (1/4) Cutter DIA x 0.0300" Radius x 1.2500" (1-1/4) Length of Cut Carbide Corner Radius End Mill for Aluminum Chipbreaker, 3 Flutes, Uncoated
TC67324
2 FL - 0.2500 (1/4)" CUTTER DIA X 0.0300" RADIUS X 1.2500 (1-1/4)" LOC, 863116
HARVEY TOOL
$71.90
0.2500 (1/4)" CUTTER DIA X 0.0300" RADIUS X 1.2500 (1-1/4)" LENGTH OF CUT CARBIDE CORNER RADIUS END MILL FOR PLASTIC, 2 FLUTES
863116
4 FL - 0.2500" (1/4) Cutter DIA x 0.0300" Radius x 0.7500" (3/4) LOC x 1.2500" (1-1/4) Reach
HARVEY TOOL
$63.70
0.2500" (1/4) Cutter DIA x 0.0300" Radius x 0.7500" (3/4) Length of Cut x 1.2500" (1-1/4) Reach Carbide Corner Radius End Mill, 4 Flutes
762816
4 FL - 0.2500" (1/4) Cutter DIA x 0.0300" Radius x 1.2500" (1-1/4) LOC - Amorphous Diamond Coated
HARVEY TOOL
$62.20
0.2500" (1/4) Cutter DIA x 0.0300" Radius x 1.2500" (1-1/4) Length of Cut Carbide Corner Radius End Mill, 4 Flutes, Amorphous Diamond Coated
917130-C4
3 FL - 0.2500" (1/4) Cutter DIA x 0.0300" Radius x 1.2500" (1-1/4) LOC - ZrN Coated
TITAN USA
Now:
$53.24
Was:
$59.15
0.2500" (1/4) Cutter DIA x 0.0300" Radius x 1.2500" (1-1/4) Length of Cut Carbide Corner Radius End Mill for Aluminum Chipbreaker, 3 Flutes, ZrN Coated
TC67425
4 FL - 0.2500" (1/4) Cutter DIA x 0.0400" Radius x 1.2500" (1-1/4) LOC
HARVEY TOOL
$40.50
0.2500" (1/4) Cutter DIA x 0.0400" Radius x 1.2500" (1-1/4) Length of Cut Carbide Corner Radius End Mill, 4 Flutes
917140
4 FL - 0.2500" (1/4) Cutter DIA x 0.0200" Radius x 1.2500" (1-1/4) LOC
HARVEY TOOL
$40.50
0.2500" (1/4) Cutter DIA x 0.0200" Radius x 1.2500" (1-1/4) Length of Cut Carbide Corner Radius End Mill, 4 Flutes
917120
4 FL - 0.2500 (1/4)" CUTTER DIA X 0.0100" RADIUS X 1.2500 (1-1/4)" LOC, 917110
HARVEY TOOL
$40.50
0.2500 (1/4)" CUTTER DIA X 0.0100" RADIUS X 1.2500 (1-1/4)" LENGTH OF CUT CARBIDE CORNER RADIUS END MILL, 4 FLUTES
917110