HARVEY TOOL
3 FL - 0.1250" (1/8) Cutter DIA x 0.0400" Radius x 0.5000" (1/2) LOC
- SKU:
- 870940
- Shipping:
- Calculated at Checkout
Description
0.1250" (1/8) Cutter DIA x 0.0400" Radius x 0.5000" (1/2) Length of Cut Carbide Corner Radius End Mill, 3 Flutes
View AllClose
Additional Information
Cutter Diameter: |
0.1250" (1/8) |
Length of Cut: |
0.5000" (1/2) |
Overall Length: |
1.5000" (1-1/2) |
Corner Radius: |
0.0400" |
Flutes: |
3" |
LOC Multiple: |
(4x) |
Shank Diameter: |
0.1250" (1/8) |
Metric: |
N |
Coating: |
UN |
Related Products
Related Products
3 FL - 0.1250" (1/8) Cutter DIA x 0.0400" Radius x 0.5000" (1/2) LOC - AlTiN Coated
HARVEY TOOL
$31.20
0.1250" (1/8) Cutter DIA x 0.0400" Radius x 0.5000" (1/2) Length of Cut Carbide Corner Radius End Mill, 3 Flutes, AlTiN Coated
870940-C3
4 FL - 0.1250 (1/8)" CUTTER DIA X 0.0400" RADIUS X 0.5000 (1/2)" LOC, 32440
HARVEY TOOL
$25.70
0.1250 (1/8)" CUTTER DIA X 0.0400" RADIUS X 0.5000 (1/2)" LENGTH OF CUT CARBIDE CORNER RADIUS END MILL, 4 FLUTES
32440
2 FL - 0.1250 (1/8)" CUTTER DIA X 0.0400" RADIUS X 0.5000 (1/2)" LOC, 46440
HARVEY TOOL
$25.70
0.1250 (1/8)" CUTTER DIA X 0.0400" RADIUS X 0.5000 (1/2)" LENGTH OF CUT CARBIDE CORNER RADIUS END MILL, 2 FLUTES
46440
3 FL - 0.1250" (1/8) Cutter DIA x 0.0300" Radius x 0.5000" (1/2) LOC - Uncoated
TITAN USA
Now:
$18.90
Was:
$21.00
0.1250" (1/8) Cutter DIA x 0.0300" Radius x 0.5000" (1/2) Length of Cut Carbide Corner Radius End Mill for Aluminum Chipbreaker, 3 Flutes, Uncoated
TC67282
3 FL - 0.1250" (1/8) Cutter DIA x 0.0200" Radius x 0.5000" (1/2) LOC - Uncoated
TITAN USA
Now:
$18.90
Was:
$21.00
0.1250" (1/8) Cutter DIA x 0.0200" Radius x 0.5000" (1/2) Length of Cut Carbide Corner Radius End Mill for Aluminum Chipbreaker, 3 Flutes, Uncoated
TC67281
3 FL - 0.1250 (1/8)" CUTTER DIA X 0.0300" RADIUS X 0.5000 (1/2)" LOC, 870930
HARVEY TOOL
$23.90
0.1250 (1/8)" CUTTER DIA X 0.0300" RADIUS X 0.5000 (1/2)" LENGTH OF CUT CARBIDE CORNER RADIUS END MILL, 3 FLUTES
870930
3 FL - 0.1250" (1/8) Cutter DIA x 0.0100" Radius x 0.5000" (1/2) LOC - Uncoated
TITAN USA
Now:
$18.90
Was:
$21.00
0.1250" (1/8) Cutter DIA x 0.0100" Radius x 0.5000" (1/2) Length of Cut Carbide Corner Radius End Mill for Aluminum Chipbreaker, 3 Flutes, Uncoated
TC67279
2 FL - 0.1250" (1/8) Cutter DIA x 0.0400" Radius x 0.1870" (3/16) LOC
HARVEY TOOL
$25.70
0.1250" (1/8) Cutter DIA x 0.0400" Radius x 0.1870" (3/16) Length of Cut Carbide Corner Radius End Mill, 2 Flutes
832940
4 FL - 0.1250" (1/8) Cutter DIA x 0.0400" Radius x 1.0000" (1) LOC
HARVEY TOOL
$33.70
0.1250" (1/8) Cutter DIA x 0.0400" Radius x 1.0000" (1) Length of Cut Carbide Corner Radius End Mill, 4 Flutes
981940