HARVEY TOOL
2 FL - 0.7500 (3/4)" CUTTER DIA X 1.1250 (1-1/8)" LOC - ALTIN COATED, 24748-C3
- SKU:
- 24748-C3
- Shipping:
- Calculated at Checkout
Description
0.7500 (3/4)" CUTTER DIA X 1.1250 (1-1/8)" LENGTH OF CUT CARBIDE REDUCE SHANK BALL END MILL, 2 FLUTES, ALTIN COATED
View AllClose
Additional Information
Cutter Diameter: |
0.7500" (3/4) |
Length of Cut: |
1.1250" (1-1/8) |
Overall Length: |
6.0000" (6) |
Flutes: |
2" |
LOC Multiple: |
(1.5x) |
Shank Diameter: |
0.6250" (5/8) |
Metric: |
N |
Coating: |
C3 |
Related Products
Related Products
2 FL - 0.7500 (3/4)" CUTTER DIA X 1.1250 (1-1/8)" LOC, 24748
HARVEY TOOL
$417.60
0.7500 (3/4)" CUTTER DIA X 1.1250 (1-1/8)" LENGTH OF CUT CARBIDE REDUCE SHANK BALL END MILL, 2 FLUTES
24748
4 FL - 0.7500 (3/4)" CUTTER DIA X 1.1250 (1-1/8)" LOC - ALTIN COATED, 943248-C3
HARVEY TOOL
$409.40
0.7500 (3/4)" CUTTER DIA X 1.1250 (1-1/8)" LENGTH OF CUT CARBIDE REDUCE SHANK SQUARE END MILL, 4 FLUTES, ALTIN COATED
943248-C3
4 FL - 0.7500 (3/4)" CUTTER DIA X 1.1250 (1-1/8)" LOC X 5.6250" REACH - ALTIN COATED, 991948-C3
HARVEY TOOL
$525.10
0.7500 (3/4)" CUTTER DIA X 1.1250 (1-1/8)" LENGTH OF CUT X 5.6250" REACH CARBIDE SQUARE END MILL, 4 FLUTES, ALTIN COATED
991948-C3
4 FL - 0.7500 (3/4)" CUTTER DIA X 0.0300" RADIUS X 1.1250 (1-1/8)" LOC - ALTIN COATED, 17648-C3
HARVEY TOOL
$418.80
0.7500 (3/4)" CUTTER DIA X 0.0300" RADIUS X 1.1250 (1-1/8)" LENGTH OF CUT CARBIDE REDUCE SHANK CORNER RADIUS END MILL, 4 FLUTES, ALTIN COATED
17648-C3
4 FL - 0.3750 (3/8)" CUTTER DIA X 1.1250 (1-1/8)" LOC - ALTIN COATED, 958624-C3
HARVEY TOOL
$50.60
0.3750 (3/8)" CUTTER DIA X 1.1250 (1-1/8)" LENGTH OF CUT CARBIDE SQUARE END MILL FOR MED ALLOY STEELSS, 4 FLUTES, ALTIN COATED
958624-C3
4 FL - 0.7500" (3/4) Cutter DIA x 0.0600" Radius x 1.1250" (1-1/8) LOC - AlTiN Coated
HARVEY TOOL
$421.30
0.7500" (3/4) Cutter DIA x 0.0600" Radius x 1.1250" (1-1/8) Length of Cut Carbide Reduce Shank Corner Radius End Mill, 4 Flutes, AlTiN Coated
766348-C3
2 FL - 0.7500" (3/4) Cutter DIA x 1.1250" (1-1/8) LOC - Amorphous Diamond Coated
HARVEY TOOL
$348.20
0.7500" (3/4) Cutter DIA x 1.1250" (1-1/8) Length of Cut Carbide Square Upcut End Mill for Plastic, 2 Flutes, Amorphous Diamond Coated
957748-C4
3 FL - 0.1250 (1/8)" CUTTER DIA X 1.1250 (1-1/8)" LOC - ALTIN COATED, 837908-C3
HARVEY TOOL
$46.30
0.1250 (1/8)" CUTTER DIA X 1.1250 (1-1/8)" LENGTH OF CUT CARBIDE SQUARE END MILL, 3 FLUTES, ALTIN COATED
837908-C3
2 FL - 0.7500 (3/4)" CUTTER DIA X 1.1250 (1-1/8)" LOC, 957748
HARVEY TOOL
$291.40
0.7500 (3/4)" CUTTER DIA X 1.1250 (1-1/8)" LENGTH OF CUT CARBIDE SQUARE UPCUT END MILL FOR PLASTIC, 2 FLUTES
957748