MICRO 100
#12-32 - 0.3750" (3/8) CUTTER DIA - 4 FL,TM-375
- SKU:
- TM-375
- MPN:
- TM-375
- Availability:
- 14
- Shipping:
- Calculated at Checkout
Description
0.3750" (3/8) CUTTER DIA CARBIDE SINGLE FORM - REDUCED SHANK #12-32 THREAD MILLING CUTTER, 4 FLUTES,TM-375
View AllClose
Additional Information
Cutter Diameter: |
0.3750" (3/8) |
Coating: |
UN |
Flutes: |
4 |
Length of Cut: |
0.093" (3/32) |
Shank Diameter: |
0.2500" (1/4) |
Flat Width: |
0.002" |
Neck Diameter: |
0.2100" |
Overall Length: |
2.60" |
Thread Size: |
12-32 |
Metric: |
N |
Related Products
Related Products
#12-32 - 0.3750" (3/8) Cutter DIA - 4 FL - AlTiN Coated
MICRO 100
$86.30
0.3750" (3/8) Cutter DIA Carbide Single Form - Reduced Shank #12-32 Thread Milling Cutter, 4 Flutes, AlTiN Coated
TM-375X
4 FL - 0.3750" (3/8) CUTTER DIA X 0.875" (7/8) LOC ,EMS-375-4
MICRO 100
$43.20
0.3750" (3/8) CUTTER DIA X 0.875" (7/8) LENGTH OF CUT CARBIDE SQUARE END MILL - NC TOLERANCE, 4 FLUTES,EMS-375-4
EMS-375-4
0.3750" (3/8) CUTTER DIA X 0.075" WIDTH (TSC) - 4 FL,MTR-375
MICRO 100
$83.00
0.3750" (3/8) CUTTER DIA X 0.075" WIDTH (TSC) CARBIDE THREAD RELIEF CUTTER, 4 FLUTES,MTR-375
MTR-375
4 FL - 0.3750" (3/8) CUTTER DIA X 0.875" (7/8) LOC ,SHR-375-4
MICRO 100
$58.40
0.3750" (3/8) CUTTER DIA X 0.875" (7/8) LENGTH OF CUT CARBIDE SQUARE END MILL FOR STEELS AND HIGH TEMPERATURE ALLOYS, 4 FLUTES,SHR-375-4
SHR-375-4
4 FL - 0.0930" (3/32) Cutter DIA x 0.3750" (3/8) LOC
HARVEY TOOL
$31.80
0.0930" (3/32) Cutter DIA x 0.3750" (3/8) Length of Cut Carbide Ball End Mill, 4 Flutes
801593
4 FL - 0.0310" (1/32) Cutter DIA x 0.3750" (3/8) LOC
HARVEY TOOL
$70.30
0.0310" (1/32) Cutter DIA x 0.3750" (3/8) Length of Cut Carbide Square End Mill, 4 Flutes
818031
4 FL - 0.3750" (3/8) CUTTER DIA X 0.875" (7/8) LOC ,GEM-375-4
MICRO 100
$36.00
0.3750" (3/8) CUTTER DIA X 0.875" (7/8) LENGTH OF CUT CARBIDE SQUARE END MILL, 4 FLUTES,GEM-375-4
GEM-375-4
4 FL - 0.3750" (3/8) CUTTER DIA X 0.875" (7/8) LOC ,BEM-375-04
MICRO 100
$41.45
0.3750" (3/8) CUTTER DIA X 0.875" (7/8) LENGTH OF CUT CARBIDE BALL END MILL, 4 FLUTES,BEM-375-04
BEM-375-04
4 FL - 0.0930 (3/32)" CUTTER DIA X 0.3750 (3/8)" LOC, 836993
HARVEY TOOL
$29.50
0.0930 (3/32)" CUTTER DIA X 0.3750 (3/8)" LENGTH OF CUT CARBIDE SQUARE END MILL, 4 FLUTES
836993