HARVEY TOOL
0.7500 (3/4)" CUTTER DIA X 2.0000 (2)" NECK LENGTH X 300° WRAP ANGLE - 4 FL, 979248
- SKU:
- 979248
- Shipping:
- Calculated at Checkout
Description
0.7500 (3/4)" CUTTER DIA X 2.0000 (2)" NECK LENGTH X 300° CARBIDE UNDERCUTTING END MILL, 4 FLUTES
View AllClose
Additional Information
Cutter Diameter: |
0.7500" (3/4) |
Neck Diameter: |
0.3550" |
Length of Cut: |
0.6990" |
Neck Length: |
2.0000" (2) |
Overall Reach: |
2.7000" |
Overall Length: |
6.0000" (6) |
Radius: |
0.3750" (3/8) |
Wrap Angle: |
300 |
Flutes: |
4" |
Shank Diameter: |
0.7500" (3/4) |
Metric: |
N |
Coating: |
UN |
Center Cutting: |
N |
Chip Breaker: |
N |
Double Ended: |
N |
Weldon Flat: |
N |
Coolant Through: |
N |
Related Products
Related Products
0.7500 (3/4)" CUTTER DIA X 2.0000 (2)" NECK LENGTH X 300° WRAP ANGLE - 4 FL - ALTIN COATED, 979248-C3
HARVEY TOOL
$391.60
0.7500 (3/4)" CUTTER DIA X 2.0000 (2)" NECK LENGTH X 300° CARBIDE UNDERCUTTING END MILL, 4 FLUTES, ALTIN COATED
979248-C3
0.3120" CUTTER DIA X 0.7500 (3/4)" NECK LENGTH X 300° WRAP ANGLE - 4 FL, 979220
HARVEY TOOL
$138.10
0.3120" CUTTER DIA X 0.7500 (3/4)" NECK LENGTH X 300° CARBIDE UNDERCUTTING END MILL, 4 FLUTES
979220
0.7500" (3/4) Cutter DIA x 1.5000" (1-1/2) Neck Length x 300° Wrap Angle - 4 FL
HARVEY TOOL
$335.40
0.7500" (3/4) Cutter DIA x 1.5000" (1-1/2) Neck Length x 300° Carbide Undercutting End Mill, 4 Flutes
926948
0.5000 (1/2)" CUTTER DIA X 0.7500 (3/4)" NECK LENGTH X 300° WRAP ANGLE - 4 FL, 984032
HARVEY TOOL
$191.20
0.5000 (1/2)" CUTTER DIA X 0.7500 (3/4)" NECK LENGTH X 300° CARBIDE UNDERCUTTING END MILL, 4 FLUTES
984032
0.1875 (3/16)" CUTTER DIA X 0.7500 (3/4)" NECK LENGTH X 300° WRAP ANGLE - 4 FL, 952312
HARVEY TOOL
$80.50
0.1875 (3/16)" CUTTER DIA X 0.7500 (3/4)" NECK LENGTH X 300° CARBIDE UNDERCUTTING END MILL, 4 FLUTES
952312
0.3750 (3/8)" CUTTER DIA X 0.7500 (3/4)" NECK LENGTH X 300° WRAP ANGLE - 4 FL, 843224
HARVEY TOOL
$143.80
0.3750 (3/8)" CUTTER DIA X 0.7500 (3/4)" NECK LENGTH X 300° CARBIDE UNDERCUTTING END MILL, 4 FLUTES
843224
0.0938" Cutter DIA x 0.7500" (3/4) Neck Length x 270° Wrap Angle - 2 FL
HARVEY TOOL
$65.00
0.0938" Cutter DIA x 0.7500" (3/4) Neck Length x 270° Carbide Undercutting End Mill, 2 Flutes
867793
Out of stock
0.2500 (1/4)" CUTTER DIA X 0.7500 (3/4)" NECK LENGTH X 300° WRAP ANGLE - 4 FL, 940116
HARVEY TOOL
$107.60
0.2500 (1/4)" CUTTER DIA X 0.7500 (3/4)" NECK LENGTH X 300° CARBIDE UNDERCUTTING END MILL, 4 FLUTES
940116
0.5000 (1/2)" CUTTER DIA X 2.0000 (2)" NECK LENGTH X 300° WRAP ANGLE - 4 FL, 952332
HARVEY TOOL
$255.00
0.5000 (1/2)" CUTTER DIA X 2.0000 (2)" NECK LENGTH X 300° CARBIDE UNDERCUTTING END MILL, 4 FLUTES
952332