Additional Information
Length of Cut: |
0.3430" (11/32) |
Overall Length: |
2.5000" (2-1/2) |
Angle per Side: |
20 |
Included Angle: |
40 |
Shank Diameter: |
0.2500" (1/4) |
Metric: |
N |
Coating: |
UN |
Related Products
Related Products
0.2500" (1/4) Shank DIA x 40° included - AlTiN Coated
HARVEY TOOL
$53.20
0.2500" (1/4) Shank DIA x 40° included Carbide Pyramid Point Engraver, AlTiN Coated
834020-C3
0.2500 (1/4)" SHANK DIA X 40° INCLUDED - 1 FL, 25130
HARVEY TOOL
$28.00
0.2500 (1/4)" SHANK DIA X 40° INCLUDED CARBIDE POINTED ENGRAVER, 1 FLUTE
25130
0.2500" (1/4) Shank DIA x 60° included
MICRO 100
$37.30
0.2500" (1/4) Shank DIA x 60° included Carbide Tipped Engraver
RSC-250-160
0.2500 (1/4)" SHANK DIA X 40° INCLUDED - 2 FL, 995516
HARVEY TOOL
$39.70
0.2500 (1/4)" SHANK DIA X 40° INCLUDED CARBIDE MARKING CUTTER, 2 FLUTES
995516
0.2500 (1/4)" SHANK DIA X 40° INCLUDED - 2 FL, 996716
HARVEY TOOL
$40.10
0.2500 (1/4)" SHANK DIA X 40° INCLUDED CARBIDE MARKING CUTTER, 2 FLUTES
996716
0.2500" (1/4) Shank DIA x 30° included
MICRO 100
$37.30
0.2500" (1/4) Shank DIA x 30° included Carbide Tipped Engraver
RTC-250-160
0.2500" (1/4) Shank DIA x 90° included
MICRO 100
$37.30
0.2500" (1/4) Shank DIA x 90° included Carbide Tipped Engraver
RNC-250-145
0.2500 (1/4)" SHANK DIA X 40° INCLUDED DE - 1 FL, 854012
HARVEY TOOL
$46.30
0.2500 (1/4)" SHANK DIA X 40° INCLUDED CARBIDE POINTED ENGRAVER DE, 1 FLUTE
854012
0.2500 (1/4)" SHANK DIA X 40° INCLUDED - 2 FL, 967420
HARVEY TOOL
$36.60
0.2500 (1/4)" SHANK DIA X 40° INCLUDED CARBIDE MARKING CUTTER FOR NON-FERROUS, 2 FLUTES
967420