HARVEY TOOL
0.0625" (1/16) Radius x 0.5000" (1/2) Cutter DIA - 4 FL - AlTiN Coated
- SKU:
- 32804-C3
- Shipping:
- Calculated at Checkout
Description
0.0625" (1/16) Radius x 0.5000" (1/2) Cutter DIA Carbide Concave Radius End Mill, 4 Flutes, AlTiN Coated
View AllClose
Additional Information
Cutter Diameter: |
0.5000" (1/2) |
Length of Cut: |
0.3750" (3/8) |
Overall Length: |
3.0000" (3) |
Radius: |
0.0625" (1/16) |
Flutes: |
4" |
Radius Center: |
0.1875" (3/16) |
Shank Diameter: |
0.5000" (1/2) |
Metric: |
N |
Coating: |
C3 |
Related Products
Related Products
0.0625 (1/16)" RADIUS X 0.5000 (1/2)" CUTTER DIA - 4 FL, 32804
HARVEY TOOL
$125.20
0.0625 (1/16)" RADIUS X 0.5000 (1/2)" CUTTER DIA CARBIDE CONCAVE RADIUS END MILL, 4 FLUTES
32804
0.0394" Radius x 0.5000" (1/2) Cutter DIA - 4 FL - AlTiN Coated
HARVEY TOOL
$146.70
0.0394" Radius x 0.5000" (1/2) Cutter DIA Carbide Concave Radius End Mill, 4 Flutes, AlTiN Coated
3281M-C3
2.0000" (2) Cutter DIA x 0.0625" (1/16) Radius - Slotting - 40 FL - AlTiN Coated
HARVEY TOOL
$312.80
2.0000" (2) Cutter DIA x 0.0625" (1/16) Radius Carbide Slitting Saw Full Radius Slitting Saw, 40 Flutes, AlTiN Coated
SAK1250-C3
4.0000" (4) Cutter DIA x 0.0625" (1/16) Radius - Slotting - 80 FL - AlTiN Coated
HARVEY TOOL
$636.70
4.0000" (4) Cutter DIA x 0.0625" (1/16) Radius Carbide Slitting Saw Full Radius Slitting Saw, 80 Flutes, AlTiN Coated
SAJ1250-C3
4 FL - 0.0625" (1/16) Cutter DIA x 0.0100" Radius x 0.0930" (3/32) LOC x 0.5000" (1/2) Reach - AlTiN Coated
HARVEY TOOL
$51.00
0.0625" (1/16) Cutter DIA x 0.0100" Radius x 0.0930" (3/32) Length of Cut x 0.5000" (1/2) Reach Carbide Corner Radius End Mill, 4 Flutes, AlTiN Coated
729862-C3
0.0312" (1/32) Radius x 0.5000" (1/2) Cutter DIA - 4 FL - AlTiN Coated
HARVEY TOOL
$141.20
0.0312" (1/32) Radius x 0.5000" (1/2) Cutter DIA Carbide Concave Radius End Mill, 4 Flutes, AlTiN Coated
32802-C3
0.0156" (1/64) Radius x 0.5000" (1/2) Cutter DIA - 4 FL - AlTiN Coated
HARVEY TOOL
$143.60
0.0156" (1/64) Radius x 0.5000" (1/2) Cutter DIA Carbide Concave Radius End Mill, 4 Flutes, AlTiN Coated
32801-C3
0.0625" (1/16) Cutter DIA x 0.5000" (1/2) Neck Length x 270° Wrap Angle - 2 FL - AlTiN Coated
HARVEY TOOL
$68.70
0.0625" (1/16) Cutter DIA x 0.5000" (1/2) Neck Length x 270° Carbide Undercutting End Mill, 2 Flutes, AlTiN Coated
775462-C3
2 FL - 0.0625 (1/16)" CUTTER DIA X 0.5000 (1/2)" LOC, 955762
HARVEY TOOL
$66.50
0.0625 (1/16)" CUTTER DIA X 0.5000 (1/2)" LENGTH OF CUT CARBIDE BALL END MILL FOR PLASTIC, 2 FLUTES
955762