MICRO 100
10.000 MM SHANK DIA X 90?ø INCLUDED ,RNCM-100-1
- SKU:
- RNCM-100-1
- MPN:
- RNCM-100-1
- Availability:
- 23
- Shipping:
- Calculated at Checkout
Additional Information
Coating: |
UN |
Flutes: |
1 |
Shank Diameter: |
10.000 mm |
Offset: |
0.100 mm |
Angle per Side: |
45 |
Included Angle: |
90 |
Face Dimension: |
0.20 mm |
Overall Length: |
72.0 mm |
Split Length: |
12.00 mm |
Metric: |
Y |
Related Products
Related Products
4.000 MM SHANK DIA X 90?ø INCLUDED ,RNCM-040-1
MICRO 100
$18.90
4.000 MM SHANK DIA X 90?ø INCLUDED CARBIDE TIPPED ENGRAVER,RNCM-040-1
RNCM-040-1
4.000 MM SHANK DIA X 90?ø INCLUDED ,RNCM-040-2
MICRO 100
$25.25
4.000 MM SHANK DIA X 90?ø INCLUDED CARBIDE TIPPED ENGRAVER,RNCM-040-2
RNCM-040-2
6.000 MM SHANK DIA X 90?ø INCLUDED - ALTIN COATED,RNCM-060-1X
MICRO 100
$28.15
6.000 MM SHANK DIA X 90?ø INCLUDED CARBIDE TIPPED ENGRAVER, ALTIN COATED,RNCM-060-1X
RNCM-060-1X
10.000 mm Shank DIA x 60° included
MICRO 100
$54.05
10.000 mm Shank DIA x 60° included Carbide Tipped Engraver
RSCM-100-1
10.000 mm Shank DIA x 60° included DE
MICRO 100
$70.45
10.000 mm Shank DIA x 60° included Carbide Tipped Engraver DE
RSCM-100-2
10.000 MM CUTTER DIA X 25.00 MM LOC X 90?ø INCLUDED - 2 FL - ALTIN COATED,DMM-100-290X
MICRO 100
$57.40
10.000 MM CUTTER DIA X 25.00 MM LENGTH OF CUT X 90?ø INCLUDED CARBIDE DRILL/END MILL, 2 FLUTES, ALTIN COATED,DMM-100-290X
DMM-100-290X
10.000 mm Shank DIA x 30° included DE
MICRO 100
$70.45
10.000 mm Shank DIA x 30° included Carbide Tipped Engraver DE
RTCM-100-2
10.000 MM CUTTER DIA X 25.00 MM LOC X 120?ø INCLUDED - 2 FL,DMM-100-2120
MICRO 100
$50.25
10.000 MM CUTTER DIA X 25.00 MM LENGTH OF CUT X 120?ø INCLUDED CARBIDE DRILL/END MILL, 2 FLUTES,DMM-100-2120
DMM-100-2120
10.000 mm Shank DIA x 60° included - AlTiN Coated
MICRO 100
$61.15
10.000 mm Shank DIA x 60° included Carbide Tipped Engraver, AlTiN Coated
RSCM-100-1X